Professional Mold Remediation in Calgary
Calgary Restorations provides professional mold remediation for homes, businesses, rental properties, multifamily buildings, and commercial properties throughout Calgary.
Mold growth is commonly associated with excess moisture from leaks, flooding, condensation, plumbing problems, roof damage, or building materials that remained wet after a previous water loss.
Our remediation services focus on identifying affected areas, addressing moisture conditions, removing or treating damaged materials where appropriate, and restoring the property.
Mold Remediation Services
Effective mold remediation involves more than cleaning visible surface growth.
The underlying moisture source should also be identified and addressed where possible.
Professional mold remediation may include:
- Property assessment.
- Moisture investigation.
- Identification of affected materials.
- Containment where appropriate.
- Removal of damaged materials.
- Cleaning of suitable surfaces.
- Structural drying.
- Moisture-source correction.
- Property restoration.
- Reconstruction where required.
The appropriate remediation process depends on the extent of the affected area, materials involved, moisture conditions, and condition of the property.
Mold Caused by Water Damage
Water damage is one of the most common conditions associated with mold growth.
Potential sources include:
- Burst pipes.
- Plumbing leaks.
- Basement flooding.
- Appliance leaks.
- Water heater failures.
- Roof leaks.
- Storm-related water intrusion.
- Previous flooding.
Moisture can remain inside walls, flooring, insulation, cabinetry, and other building materials even after visible water has been removed.
This is why moisture detection and structural drying are important parts of water damage restoration.
Mold After Flooding
Flooding can introduce large amounts of moisture into a property.
Affected materials may include:
- Drywall.
- Insulation.
- Flooring.
- Subfloors.
- Framing.
- Baseboards.
- Cabinetry.
- Ceiling materials.
When materials remain damp, conditions may develop that support mold growth.
A flooded property may therefore require both water damage restoration and mold remediation depending on the conditions found.
Basement Mold Remediation
Basements can be particularly vulnerable to moisture problems because they are below or partially below grade.
Potential moisture sources include:
- Foundation water intrusion.
- Plumbing leaks.
- Previous flooding.
- Condensation.
- Drainage problems.
- High indoor humidity.
- Sewer backups.
Basement mold may affect drywall, insulation, wood framing, flooring, storage areas, and other building materials.
Remediation should address both affected materials and the moisture conditions contributing to the problem.
Mold After a Burst Pipe
A burst pipe can release significant amounts of water into walls, floors, ceilings, and concealed building cavities.
Even after standing water has been removed, moisture may remain in surrounding materials.
If these areas are not adequately dried, mold growth may develop.
Restoration following a burst pipe may therefore involve:
- Water extraction.
- Moisture detection.
- Structural drying.
- Removal of damaged materials.
- Mold remediation where required.
- Property repairs.
Mold From Roof Leaks
Roof leaks can introduce water into areas that are difficult to see.
Moisture may travel through:
- Attics.
- Insulation.
- Ceiling cavities.
- Wall assemblies.
- Interior finishes.
Roof leaks that continue over time can create persistent damp conditions.
The roof problem itself should be repaired by an appropriate qualified professional while affected interior materials are assessed and restored.
Mold After Storm Damage
Storm and hail damage can compromise roofing, flashing, windows, siding, and other exterior components.
If rainwater enters the building, moisture may become trapped inside walls, ceilings, insulation, or flooring.
This can create conditions that support mold growth if the affected areas are not identified and dried.
Mold After Sewage Damage
Sewage backups introduce both contamination and moisture into a property.
Materials affected by sewage may require removal rather than ordinary drying or surface cleaning.
Once contaminated materials have been appropriately addressed, remaining areas may still require structural drying and moisture monitoring.
Identifying Moisture Problems
Visible mold can indicate a moisture issue, but the source of the moisture may not always be immediately obvious.
Possible signs of moisture problems include:
- Water staining.
- Damp drywall.
- Warped flooring.
- Persistent condensation.
- Previous flooding.
- Plumbing leaks.
- Roof leaks.
- Damp basement areas.
- Musty or unusual odours.
Professional assessment may help determine which areas require further investigation.
Hidden Mold and Concealed Moisture
Moisture can sometimes affect concealed building materials.
Potential locations include:
- Behind drywall.
- Beneath flooring.
- Inside insulation.
- Wall cavities.
- Ceiling spaces.
- Behind cabinetry.
- Basement finishes.
The objective of professional assessment is not simply to search for mold everywhere, but to understand moisture conditions and identify areas that may reasonably require investigation.
Mold Remediation and Containment
Depending on the size and location of the affected area, containment may be used to help separate remediation work from unaffected areas of the property.
Containment procedures vary depending on the circumstances.
The remediation process may involve:
- Isolating the work area.
- Removing affected materials.
- Cleaning appropriate surfaces.
- Managing debris.
- Drying remaining materials.
- Preparing the area for restoration.
The exact approach should reflect the actual conditions found at the property.
Removal of Mold-Damaged Materials
Some materials may be suitable for cleaning, while others may require removal.
Porous materials can be more difficult to restore when growth or moisture has penetrated deeply.
Materials that may be evaluated include:
- Drywall.
- Insulation.
- Carpet.
- Ceiling tiles.
- Wood products.
- Flooring.
- Cabinet components.
Whether a material should be retained or removed depends on the extent of damage, condition of the material, moisture exposure, and ability to restore it appropriately.
Cleaning Affected Surfaces
After damaged materials are removed where required, remaining surfaces can be cleaned using methods appropriate to the material and conditions.
The objective is to address affected areas and prepare the property for drying and restoration.
Surface cleaning alone is unlikely to solve a recurring problem if the underlying moisture source remains.
Structural Drying
Moisture correction is a critical part of mold remediation.
Remaining building materials may need to be dried before repairs begin.
Structural drying can involve:
- Air movement.
- Dehumidification.
- Moisture monitoring.
- Removal of materials that cannot be adequately dried.
The objective is to reduce excess moisture and help prevent the conditions that contributed to the original problem from continuing.
Mold Remediation and Reconstruction
More extensive remediation projects may require repair or reconstruction after affected materials have been removed.
Restoration may involve:
- Drywall replacement.
- Insulation replacement.
- Flooring repairs.
- Baseboards and trim.
- Ceiling repairs.
- Cabinet repairs.
- Painting and finishing.
- Other interior reconstruction.
Reconstruction should generally begin after the moisture issue and remediation work have been appropriately addressed.
Residential Mold Remediation
Mold remediation is available for residential properties throughout Calgary.
Properties may include:
- Detached homes.
- Townhouses.
- Condominiums.
- Rental properties.
- Basement suites.
- Multifamily buildings.
Residential mold issues often occur alongside water damage, plumbing leaks, basement moisture, roof leaks, or previous flooding.
The remediation plan should reflect the actual source and extent of the moisture problem.
Commercial Mold Remediation
Commercial properties can also experience mold problems following water damage, leaks, flooding, or persistent moisture.
Commercial remediation may be required for:
- Offices.
- Retail spaces.
- Restaurants.
- Warehouses.
- Apartment buildings.
- Multifamily properties.
- Rental properties.
- Commercial facilities.
- Professionally managed properties.
Larger properties may require additional coordination, containment planning, documentation, and restoration work.
Our Mold Remediation Process
Every mold remediation project is different, but the process generally follows several stages.
1. Request Service
Provide information about the property, visible mold or moisture concerns, and any known leaks, flooding, or previous water damage.
2. Assess the Property
Affected areas and likely moisture sources are evaluated.
3. Identify the Moisture Source
The underlying source of excess moisture should be identified where possible.
This may involve plumbing, roofing, drainage, condensation, or previous water damage.
4. Establish the Remediation Area
The scope of affected materials is determined and containment may be established where appropriate.
5. Remove Damaged Materials
Materials that cannot reasonably be restored may need to be removed.
6. Clean Appropriate Surfaces
Remaining affected areas are cleaned using methods suitable for the conditions and materials involved.
7. Dry the Structure
Excess moisture is reduced using appropriate drying methods.
8. Address the Moisture Problem
The underlying leak, water intrusion, or moisture condition should be corrected by the appropriate professional.
9. Restore the Property
Damaged finishes and building materials can be repaired or reconstructed once remediation is complete.
What to Do If You Find Mold
If you discover visible mold or persistent moisture in your property, avoid disturbing large affected areas unnecessarily.
Look for the Moisture Source
Consider whether there has been:
- A plumbing leak.
- Flooding.
- Roof damage.
- Basement water.
- Condensation.
- Previous water damage.
Address Active Water Problems
An active leak or other moisture source should be addressed by the appropriate qualified professional.
Avoid Spreading Contaminated Materials
Aggressive cleaning, demolition, or disturbance of a larger affected area can spread dust and debris throughout surrounding spaces.
Request Professional Assessment
Professional assessment can help determine the extent of the moisture problem and appropriate remediation approach.
Mold and Insurance Claims
Insurance coverage for mold-related damage varies considerably.
Coverage may depend on:
- The original cause of the moisture.
- Whether the water loss is covered.
- Policy wording.
- Exclusions.
- Maintenance issues.
- Duration of the problem.
- Other circumstances.
For example, mold resulting from a sudden covered water loss may be treated differently from mold associated with long-term maintenance or moisture problems.
Property owners should contact their insurer for information specific to their policy.
Calgary Restorations does not determine or guarantee insurance coverage.
Mold Remediation Service Areas
Our primary mold remediation service area is Calgary.
Depending on contractor availability and project requirements, services may also be available in:
- Airdrie.
- Cochrane.
- Chestermere.
- Okotoks.
- Rocky View County.
- Foothills County.
Frequently Asked Questions
What causes mold in a property?
Mold growth is commonly associated with excess moisture from leaks, flooding, condensation, roof problems, plumbing issues, or materials that remained wet after water damage.
Can mold grow after water damage?
Yes. Water-damaged materials that remain damp can create conditions that support mold growth.
Does all mold-damaged drywall need to be removed?
Not necessarily. The appropriate approach depends on the extent of the affected area, condition of the material, moisture exposure, and ability to clean and restore it.
Can mold grow behind walls?
Moisture can enter wall cavities and other concealed areas. Whether investigation is required depends on the circumstances and signs of water intrusion or moisture.
Is cleaning visible mold enough?
Not always. If the underlying moisture source remains, the problem may return. Effective remediation should also address the moisture conditions contributing to the issue.
How long does mold remediation take?
There is no single timeframe. The duration depends on the size of the affected area, materials involved, moisture conditions, drying requirements, and restoration work required.
Do you provide commercial mold remediation?
Yes. Mold remediation may be available for offices, retail properties, multifamily buildings, rental properties, commercial facilities, and professionally managed properties.
Is mold damage covered by insurance?
Coverage varies considerably. It may depend on the cause of the moisture, policy wording, exclusions, and circumstances of the loss. Contact your insurer for information specific to your policy.
Request Mold Remediation in Calgary
If your home, rental property, business, or commercial building has visible mold, persistent moisture, or mold following water damage, contact Calgary Restorations.
Tell us where the property is located, where the problem is occurring, and whether you know of any leaks, flooding, or previous water damage.